Fit guide
Built for coin-size trackers
The pocket is sized for flat, round locators about the size of an AirTag. Thick silicone shells or large clip cases usually do not fit. Trackers are sold separately.
| Tracker | Fit | Note |
|---|---|---|
| Apple AirTag | Yes | Sits flat in the pocket with room to press the sounder. |
| Tile Mate | Yes | Same coin shape. Leave a little slack so the button stays reachable. |
| Samsung SmartTag2 | Yes | Fits the pocket. Do not force a hard case into the sleeve. |
| Chipolo One | Yes | Works bare. Thick silicone cases may be tight. |
| Jiobit / AngelSense style | No | Those clip cases are bigger than this pocket. Use their own mounts. |
Where to stick it
- Diaper outer shell — Center of the front or back panel, away from the tabs you open for changes.
- Onesie or pajamas — Outside fabric only. Remove the tracker and discard the pouch before laundry.
- Jacket or coat hem — Inside the lower hem or a soft waistband for one outing, then discard.
- Not on bare skin — The adhesive belongs on the diaper or clothing, never on the child.
- Disposable — One pouch per wear. Do not restick or wash.